ASP Triad USB And XT Flashlights

The Triad® USB adds a micro USB charge port, internal charge circuit and Lithium-Ion power cell to the ASP signature design. Premium Triad features remain. A foamed vinyl grip complements a matte black Type III hardcoat anodized aerospace aluminum body. The four cut switch rotates to an Intermittent · Locked · Constant position. A replaceable belt clip may be attached lens up or lens down. All connectors and springs on the Triad USB are gold plated. The electronic circuit board drives a Cree XPG2 LED to 530 lumens as measured against the ANSI FL1 Standard.

Loosening the head of the Triad reveals the micro USB charge port. Attach the retractable charging cable to the supplied car charger, wall charger or to a computer USB port. Even a micro USB cell phone charger can be used to recharge the Triad USB. The battery indicator of the Triad blinks red when charging. It turns solid green when fully charged. The wall charger, car charger and retractable charge cord are encased in a zippered ballistic carrier and included with the light. The car charger and wall charger have a blue LED indicator to confirm that the power source is active.

Dual Fuel Technology of the Triad USB allows use of the CR123A primary cells.  The batteries are unaffected by the Triad USB charge circuit.

Triad XT lights provide specialized illumination.  The bezel of the Triad XT opens to expose a mode switch which cycles between 530 lumens, 60 lumens and strobe.  The open bezel XT can be cased, rotated and presented.  The bezel settings are independent of the rear mounted activation switch.

TRIAD USB

• Length:  6.25″
• Diamter:  1.4″
• Weight:  6.72 ounces (with batteries)
• System:  3.7 volt
• Cell:  2 CR123A Lithium Batteries (or USB charged)
• Output:  530 lumens (ANSI Standard)
• Run Time:  3 hours

TRIAD XT

• Length:  6.25″
• Diameter:  1.4″
• Weight:  6.72 ounces (with batteries)
• System:  3.7 volt
• Cell:  2 CR123A Lithium Batteries (or USB charged)
• High Level Output:  530 lumens
• Run Time:  3 hours
• Low Level Output:  70 lumens (ANSI Standard)
• Run Time:  20 hours